Double-action technology:
1 x Nozzle Wrench
1 x Eye Dropper
1 x Instruction
1 x 0.3mm nozzle
1 x 0.5mm nozzle
1 x 0.5mm nezzle cap
1 x 0.3mm jet needle
1 x 0.5mm jet needle
1 x Fast joint
1 x Oil / water separator
1 x Air hose
Before use to airbrush debugging to the best state, as follows:
Please use the stability, if dropped on the ground, may affect the use effect, or damage.
After use, please clean the airbrush, avoid clogging, effect the next time you normally use.
In order to protect the item well, a professional person to change needle and nozzle will be recommend.
To prolong your airbrush gun’s life span, please clean your gun in a proper way:It will be better to clean with water thinner like Alcohol after water paint. oil paint should be cleaned with oil thinner like ethyl acetate.
2. Hold the airbrush lightly in you hand.
3. By pressing the main lever,a stream of air emerges.Then draw it backward gradually for Color atomization.
4. The spray pattern is in accordance with the distance between a work surface and a air brush.
5. For fine line spray,remove the needle cover and hold the air brush near a work surface.
2. Refill cup with water or solvent,then block the needle cover with a finger and spray. The air flows backward into nozzle to clean the paints remained the air brush.
Q&A:
1. Problems:Paint nozzle leak or abnormal condition of spray.
Possible reason: The needle is bent or distorted.
Solutions: change accessories/parts
Possible reason: Poor connection of nozzle and needle
Solutions: Open the Standard-Handle Adjusting, loosen the needle chucking net, then use the needle touch the nozzle back and forth; screw tightly the needle chucking net.
2. Problems:Could not spray or bad atomization
Possible reason: nozzle clogged
Solutions: clean the nozzle by solvent
Possible reason: the needle chucking net is loose
Solutions: Open the Standard-Handle Adjusting, loosen the needle chucking net; pull out the needle and put it back,repeat this action a few times ;screw tightly the needle chucking net.
Possible reason: operation button doesn’t work
Solutions: Open the Standard-Handle Adjusting, loosen the needle chucking net; pull out the needle and put it back,repeat this action a few times ;screw tightly the needle chucking net.
|
Shipping Way(Free) |
Delivey Time |
Order Amount |
|
YANWEN_JYT |
15-60 working days |
< $5 |
|
China Post/ePacket/OTHER |
15-60 working days |
< $150 |
|
EMS |
8-12 working days |
>=$150 |
|
DHL/ UPS/Fedex/ TNT |
3-8 working days |
>=$300 |
) for us,it is very important for us to offer you our best service next time.
The goods are satisfied. Quality very much.
produto fino de qualidade, chegou dentro do prazo, super 10.
хорошо
Во Львов посылка шла месяц, трек отслеживался. На вид качество хорошее. К сожалению руки не доходят проверить в работе. Как проверю - дополню отзыв. В целом покупкой доволен
The package arrived as described. Very nice